Following on from a conversation with former editor Phil Aldridge, this is a mechanic’s cheat for any hub caps.

If you press your hub caps on and sometimes they fall off, the cause is loss of metal. The Splitscreen and Bay window steel wheels have hub caps that attach to the wheel by gripping 3 lugs on the wheel itself. Repeated attachment and removal of the hub caps over the years removes tiny amounts of metal from the steel wheel and can also make the hub caps slightly wider as well.

The new ones are known as “summer chrome” and do not last very long in our climate. The original ones tend to have rusted by now. Any time you clean one or fit one, there is a danger of them falling off.

A mechanic friend suggested this trick which has worked for him for decades. Remove the hub cap and thoroughly clean the wheel. It looks better already, doesn’t it? Now with a clean, dry wheel, apply some electrician’s tape over each of the 3 lugs being careful to cover the piece that grips the hub cap. Offer up the hub cap to ensure that the tape is not visible.

Once all 3 lugs are taped, place the hub cap over 2 of them and tap the hub cap onto the third one. It can be quite difficult to do this and be careful to tap the edge of the hub cap otherwise you are likely to dent the middle! There are plenty of dented ones visible on member vans! If you dent it, tap the dent out carefully from the inside.

With all of them on, admire your handywork – and be a lot more confident that the caps will be there when you arrive.